Is your home an older property that needs its period features reinstated? Then why not transform your ceiling by adding a decorative ceiling rose and make a feature of your light fitting.

Plaster ceillng roses are great focal points but they're heavy so are best fitted by a professional to ensure they're securely fitted. You could also use polyurethane ones which are much lighter and can be screwed into place or polystyrene ones which you can glue straight on to the ceiling. Make sure you pick a ceiling rose which matches the period-style of your home and don't forget to fit a stunning light fitting to make it stand out! Here's the kit you will need:

* Electric cable, pipe and stud (joist) detector
* Drill-driver with countersink drill bit
* Grip-and-grab adhesive
* Wood screws
* Flexible filler
* Emulsion paint

Turn the electricity off at the mains and dismantle your light fitting until you're left with the light flex dangling from the ceiling and nothing on the end. Heavy ceiling roses should be screwed into the joists, so find those and check for pipes and cables with the detector.

Drill a hold for the flex in the centre of the ceiling rose. Hold the rose in place and if you're going to screw it, mark four equally spaced points on it to correspond with the joist, then drill countersunk holes through these points.

Continued below.

Apply adhesive all over the back of the rose. If you're just gluing, thread the flex through the centre hole, position the rose and press firmly. If using screws, do the same but also screw through the pre-drilled holes in the joists. Neatly fill in the screw holes.

Fill any gaps between the rose and ceiling with flexible filler, then wipe off the excess. Paint when dry. Put the light fitting back together and reconnect the power.

For more decorating inspiration, craft ideas and cleaning hacks don't miss our dedicated DIY guide.

Chosen by

House to Home